Aerial view of a tropical island with mountains

    How it works

    Waste in. Clean power out. Nothing left to dump.

    A fully enclosed plant using technology that has run safely in Europe, Asia and the Middle East for decades.

    Inside the plant

    Follow the waste from sealed bale to clean air.

    Hover or tap a station. Nothing on this diagram is open to the air.

    80 MW to the gridAsh → road base, metals recycledSealed balesFurnace, 850°C+Steam turbineGas cleaningMonitoredstack

    Bales are fed onto a moving grate and burned at over 850°C. Moving-grate combustion is the most proven energy-from-waste technology in the world: more than 2,500 plants and over 50 years of operation.

    The facility at a glance

    Location
    Vuda Point, Fiji: 85 hectares zoned for industry, with existing industrial infrastructure and deep-water port access, close to Nadi International Airport
    Capacity
    2,700 tonnes of waste a day, 900,000 tonnes a year
    Output
    80 MW net to Fiji's grid, 24 hours a day, up to 45% of national demand
    Technology
    Moving-grate combustion by Kanadevia Inova: more than 50 years of operation worldwide, used in Singapore, Japan, Switzerland, Denmark, France and the UAE
    Air emissions
    Within European Union Industrial Emissions Directive limits, the strictest in the world
    Port
    Deep-water berths for large vessels: sealed residual waste in; ash by-products and industrial goods out
    Resilience
    Designed for Category 5 cyclones, with air-cooled condensers so the plant does not draw on local water
    Fuel buffer
    Three weeks of sealed waste stored on site for uninterrupted operation
    Volume
    About 90 percent less waste by volume after combustion
    Investment
    FJ$1.4 billion

    Step by step

    1. 1

      Waste arrives sealed

      Non-recyclable waste is processed into residual waste, baled, wrapped and sealed, then delivered through the port or by road. Nothing is handled in the open, and the building is kept under negative pressure so odours cannot escape.

    2. 2

      Combustion above 850°C

      Bales are fed into a high-temperature furnace on a moving grate, the most proven energy-from-waste technology in the world: more than 2,500 plants, over 50 years of operation and high availability.

    3. 3

      Steam drives turbines

      Heat from combustion makes steam that drives turbines, generating firm electricity for the national grid around the clock.

    4. 4

      Air is cleaned before it leaves

      Fabric filters, dry sorbent injection and activated carbon remove pollutants so emissions stay within European Union limits. Stack height was set using air-dispersion modelling. Emissions are monitored continuously, and the project has committed to making the data publicly available.

    Where the waste comes from

    The facility is designed to process Fiji's own residual waste and, through the port, baled and sealed residual waste from across the region. Every bale arrives sealed and is handled in an enclosed system designed to meet Fiji's biosecurity requirements. The scale of the plant is what makes firm, affordable baseload power possible.

    Safeguards

    • Negative-pressure building so odours cannot escape
    • Stack height set by air-dispersion modelling
    • Continuous emissions monitoring, published
    • Air-cooled condensers: no draw on local water
    • Noise, traffic, flood and cyclone risk assessed
    • Marine ecology and a mangrove management plan

    What comes out

    90% less volume

    Combustion reduces the volume of waste by about 90 percent.

    Metals recovered

    Ferrous and non-ferrous metals are extracted from the ash and recycled.

    Ash reused

    Bottom ash can be used in construction aggregates and road base. Fly ash is contained in licensed facilities, with potential for use in concrete and block making.

    Source: TNG Fiji EIA, Bottom Ash and Fly Ash Reuse Report (Appendix M).

    Assessed in detail

    The Environmental Impact Assessment includes specialist studies on air quality, odour, human health risk, noise and vibration, flooding, climate risk, greenhouse gas, coastal processes, marine water and sediment, terrestrial and marine ecology, traffic, landscape and visual impact, social impact, and a mangrove management plan. All of them are published on this site.

    Read the EIA documents